Once you have determined where you are going to mount the cabinets, you will want to locate the mounting strip on the back of the cabinet. Change Points on a Briggs and Stratton.
Drive them in tight and snug to secure the cabinet to the cinder block wall. Tip If a screw begins to slip out, drill another hole and begin again to ensure that all screw placements are secure.
Resources Fix My Cabinet: The trick to mounting your wall cabinets correctly is to be sure to mortar joints or concrete blocks.
Locating the proper spaces to drill into the wall as well as securing the cabinet in place can be challenging, and the process of securing the cabinet to the wall itself requires the use of specific tools and fasteners not normally required with cabinet installation. This is usually on the backside top and the bottom of the cabinet if you are mounting wall cabinets and not floor cabinets.
Best Answer. Once the holes have been marked level on the concrete wall, take the cabinets down. Next, drill pilot holes thru the mounting strip. Remove the cabinet and complete the holes, drilling through the wall surface into the cavity of the block. If you use the proper tools and materials, you can make the cabinet installation a trouble-free one, gaining a bit of storage space in the process.
Related Articles. Up Next.
Pick up the cabinet -- use the assistant -- and place the props under it. Sign In to join the community Help. If possible, be sure to give yourself an 18 inch space from the top of the cabinet to the ceiling. Accessed 26 February 2019. Having some assistance will help with the next step.